RPS 5HP 13RPS50, Up to 950ft Head, 10.8 to 21 GPM, Deep Well Submersible Pump End + 5HP 220V Motor + Starter Box

13RPS series pumps are designed for low flow applications of 21 GPM or under. They can be self-installed or placed using a local installer. At 950 feet of head the 13RPS50 will pump 10.8 GPM! 1.25" FNPT Outlet.

This RPS pump uses a hearty 3 Wire Single Phase 5HP Motor and 3.85″ diameter pump end. The Outlet includes a built in check valve, most people add on an additional external check valve as well. The most efficient brushless motors mean no replacement of carbon brushes and years of smooth, reliable performance. Impellers are made of a composite material resistant to abrasion and chemical damage. Encapsulated winding for superior short protection. The entire body is made of corrosion resistant 304 stainless steel, and compliant to all drinking water standards. Includes a starter box matched to the pump HP with starting capacitor. 

✅  NSF Drinking Water and UL Compliant

Total Head	Gallons Per Minute (GPM)
No head	21
25 feet	21
50 feet	21
100 feet	21
125 feet	21
150 feet	21
200 feet	21
250 feet	21
300 feet	21
350 feet	21
400 feet	20.8
450 feet	20.2
500 feet	19.6
550 feet	18.8
600 feet	18.1
650 feet	17.3
700 feet	16.4
750 feet	15.5
800 feet	14.6
850 feet	13.5
900 feet	12.2
950 feet	10.8
Above 950 feet	Size Up for Optimal Performance

  

Using a pressure tank or pressure system? You'll need to add the depth of your well with the PSI in feet of head to get your "Total Head" number for sizing. 

10 PSI = 23 feet of head 

20 PSI = 46 feet of head 

30 PSI = 70 feet of head 

40 PSI = 90 feet of head 

50 PSI = 115 feet of head 

60 PSI = 140 feet of head

Example: 50 foot (well depth) + 90 feet of head (from a 40 PSI pressure tank) = 140 feet of total head. If your total head number exceeds this pumps ability range, size up to get a similar flow with higher head ability! 

Need more water? Check out the other 13RPS Series Models!